Zenec ZE-RVSC150MV - Multiview Reversing camera for Motorhomes camper with swivelling head, specially designed multiviewable devices

The ZENEC ZE-RVSC150MV Multiview rear view camera is designed for partially and fully integrated motorhomes. The camera is very compact, easy to install and compatible with all Multiview controllable ZENEC multimedia and sat nav systems, e.g. the Z-N1000, Z-N975 and Z-N976. Special feature of this RV camera is the multiview display mode, which allows you to choose between six camera views: normal, top to bottom, panorama, L/R blind spot, two-part screen, three-part screen. You can select the desired image view directly from the touch screen of the ZENEC device. To allow safe maneuvering and parking, the ZE-RVSC150MV automatically switches to normal mode when engaging reverse gear to monitor the close range behind the vehicle. Other image modes are used to control the side area or to observe the traffic behind the vehicle (digital rear view mirror). The Pixelplus CMOS image sensor allows an image resolution of 700 TV lines with high light sensitivity. The sensor sits vertically in the IP68 certified die-cast aluminium housing. Therefore, the image section can be optimally adapted to different vehicle models and the individual needs of the drivers. The lighting with 5 IR LEDs and the dynamic brightness control via an LDR element ensure a good view even at dusk or at night. Housed in a mini housing, the flexible manoeuvring aid can be mounted discreetly. The 15 m long main system cable of the ZE-RVSC150MV is equipped with mini 4-pin connectors. Dimensions (L x W x H): 74 x 54 x 44 mm. Box contents: camera, main extension cable (15 m), cable end for HU side connectors, mounting hardware and instructions.