Zenec ZE-RVC80MV Universal Multiview Rear View Camera for Cars and Motorhomes, Swivelling Head 170 Viewing Angle Devices

The Multiview rear view camera ZE-RVC80MV is designed for universal use in cars or motorhomes. The camera is very compact, easy to install and compatible with all Multiview controllable ZENEC multimedia and sat nav systems, e.g. the Z-N1000, Z-N975 and Z-N976. Special feature of this camera is the multiview display mode, which allows you to choose between six camera views: normal, top to bottom, panorama, L/R blind spot, two-part screen, three-part screen. You can select the desired image view directly from the touch screen of the ZENEC device. To allow safe maneuvering and parking, the ZE-RVC80MV automatically switches to normal mode when engaging reverse gear to monitor the close range behind the vehicle. Other image modes are used to control the side area or to observe the traffic behind the vehicle (digital rear view mirror). The Pixelplus PC1058C CMOS image sensor allows an image resolution of 700 TV lines with high light sensitivity. The sensor sits vertically (70° up and down) in the IP68 certified die-cast aluminium housing. Therefore, the image section can be optimally adapted to different vehicle models and the individual needs of the drivers. Housed in a mini housing, the flexible manoeuvring aid can be mounted discreetly. The 15 m long main system cable of the ZE-RVC80MV is equipped with mini 4-pin connectors to keep the cable entry hole as small as possible. ZE-RVC80MV Dimensions (L x W x H): 44 x 23 x 29 mm Package includes: camera, main extension cable (15m), cable end for HU side connectors, M6 hollow threaded screws, mounting hardware and installation instructions.