Glow Plug BOSCH 0 250 523 004

Voltage: 11.0 V / thread (ISO): M 10 x 1.25 / tightening torque: 15 Nm / dimensions: 169 mm The glow plug heats up from ambient temperature to 1,000 °C in approx. 1.3 seconds. The generation allows an afterglow temperature of almost 1,350 °C, the temperature is about 30 percent higher than metal glow plugs Quick start guaranteed even in extremely cold ambient temperatures of up to -28 °C after only 2 seconds of preheating, conventional metal glow plugs require approx. 15 seconds for the same power under these conditions, DuraSpeed is one of the fastest glow plugs on the market The DuraSpeed ceramic glow plug reduces the battery load and allows for faster start-up readiness of the engine. A voltage drop in the battery when cold starts does not lead to a loss of heat output of the glow plug High preheating temperature, long afterglow time: the DuraSpeed ceramic glow plug allows an afterglow time of approx. 15 minutes at 1,200 °C, which significantly reduces engine noise in cold and idle, intermediate annealing phases serve to regeneration of the diesel particulate filter, in addition, they can stabilise short ignition phases in the overrun operation of the engine Diesel particulate filter - The intermediate glow phases DuraSpeed of the glow plug are used to regeneration the diesel particulate filter Ceramic and metal glow plugs are not interchangeable Please check the suitability for your vehicle using the vehicle identification, all restrictions must be complied with All work should only be carried out by trained personnel