ZENEC ZE-RCE3704-2S Rear View Brake Light Camera Compatible with Fiat Double Lens for Ducato, Peugeot Boxer & Citroën Jumper, Ideal Motorhomes Campers

Dual lens rear view camera for motorhomes and vans: The ZE-RCE3704-2S is compatible with Fiat Ducato III, X250/X251 (2006-2014), X290 (2014-2021), Series 8, from Q3 2021, Citroen Jumper II, 250/250D/22250L (2006 onwards), Peugeot Boxer, 250/251 (2006 onwards) and Opel Movano, Type C (2021 onwards). The ZE-RCE3704-2S is simply inserted into the original 3rd Integrated brake light: unscrew the reflector housing of the brake light, put on the camera console, connect the cable, reassemble the reflector - done. The ZE-RCE3704-2S has two camera modules with different focal lengths. With a horizontal viewing angle of 50°, Cam1 allows you to monitor more distant objects behind the vehicle (digital rear view mirror). Cam2 with 100° viewing angle and facing downwards is used to monitor the close range directly behind the vehicle for reverse manoeuvring and parking. The vertical image section captured by Cam2 can be manually adjusted for individual adjustment. The high-quality, high-resolution CMOS sensors used offer good light sensitivity and a large dynamic contrast range. The roller-shaped Cam2 assembly also contains two powerful LEDs that provide fully automatic twilight and night illumination controlled via LDR light sensor. The ZE-RCE3704-2S has an internal microphone as an additional source of acoustic information on the processes behind the vehicle during maneuvering. The ZE-RCE3704-2S is compatible with monitors, 1-DIN and 2-DIN multimedia systems and naviceivers that have two CVBS camera inputs (RCA). Thanks to the special camera housing – built according to protection class IP68 – the ZE-RCE3704-2S is optimally protected against splashes of water or dust. Due to the wide operating temperature range from -20°C to +70°C, there is always a clear view to the rear - even under extreme temperature and weather conditions. The included system cable is equipped with WAECO / DOMETIC connectors. The connection in vehicles that are factory-equipped with a 6-pin Waeco / Dometic main cable is therefore particularly simple and time-saving. Box contents: camera unit with sensors and 30 cm cable, 11 m long main cable, 25 cm long cable end piece for connection to the control unit, 2 studs for mounting the original rear light reflector on the vehicle - original brake light reflector not included in box contents