Waoclowr mixer module package contents 4 pieces, weight 11 g, green, 33 x Box contents: modules, g each, compact mm, ideal for series construction, laboratory and

Prices from
21.26

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon 2. AD831 provides a third-order interception point of +24dBm, which can reach LO power consumption of -10dBm. No high-performance LO drivers are required and there are no corresponding shielding and isolation problems. Therefore, it can improve system performance and reduce system costs compared to passive mixers. 3. The mixer is designed to be powered from a single power supply and the HF, LO connectors have DC isolation capacitors for easy use. The operating frequency of the and LO inputs can be up to 500 MHz. The output is a single-ended voltage output. It has an output bandwidth of 250 MHz. 1. AD831 is a single-chip mixer with low distortion and wide dynamic range, suitable for -IF downward conversion in and VHF receivers, the second mixer in DMR base stations, DC baseband conversion, and quadrature modulation and demodulation as well as detection of Doppler frequency shifts in ultrasonic imaging and other applications 4. To adjust the gain, a single resistor is used between the pins OUT and. The amplifier has low DC offset characteristics and therefore can be used for DC coupling applications such as DC baseband frequency conversion and quadrature amplitude demodulation 5. With the mixer output amplifier and source impedance, the SSB noise ratio of the mixer is 10.3 dB at 70 MHz. Unlike passive mixers, AD831 has no insertion loss, no external duplexer and no passive termination. AD8362 has working modes: power measurement and control. Figure 1 shows VOUT and VSET in power measurement mode

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 21.26

Description (1)

2. AD831 provides a third-order interception point of +24dBm, which can reach LO power consumption of -10dBm. No high-performance LO drivers are required and there are no corresponding shielding and isolation problems. Therefore, it can improve system performance and reduce system costs compared to passive mixers. 3. The mixer is designed to be powered from a single power supply and the HF, LO connectors have DC isolation capacitors for easy use. The operating frequency of the and LO inputs can be up to 500 MHz. The output is a single-ended voltage output. It has an output bandwidth of 250 MHz. 1. AD831 is a single-chip mixer with low distortion and wide dynamic range, suitable for -IF downward conversion in and VHF receivers, the second mixer in DMR base stations, DC baseband conversion, and quadrature modulation and demodulation as well as detection of Doppler frequency shifts in ultrasonic imaging and other applications 4. To adjust the gain, a single resistor is used between the pins OUT and. The amplifier has low DC offset characteristics and therefore can be used for DC coupling applications such as DC baseband frequency conversion and quadrature amplitude demodulation 5. With the mixer output amplifier and source impedance, the SSB noise ratio of the mixer is 10.3 dB at 70 MHz. Unlike passive mixers, AD831 has no insertion loss, no external duplexer and no passive termination. AD8362 has working modes: power measurement and control. Figure 1 shows VOUT and VSET in power measurement mode


Product specifications

Brand Waoclowr
EAN
  • 6033982429372

Featured Choice
€ 21.26
To Shop