Universal 12V Car Boat Motorcycle Key Switch Panel 2Position With 2

3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal from the LED. Then connect the LED negative wire (black) to a DC negative bus bar. 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the. where the panel is to be mounted. 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal. 5. Mount the switch panel.Clean the where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting as tight as possible with self-tapping screws.6. and . all the AC& DC powers to supply power to the panel. Turn all branch circuits to check if the panel works normally.