Tilta TA-SFH4-57-G Side Focus Handle Type I Nucleus Nano N for BMPCC 4K / 6K GH5 6300 6400 XT3 Z7 Camera Cage (F570 Battery Not Included)

This side handle slides on the base of the middle and the complete cages of the Tiltaing camera. A battery port at the bottom of the handle allows you to use an F550/F570 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle. An integrated wheel allows you to control the Nucleus Nano motor and a start/stop button allows you to control the start / stop function of the recording of the camcorder through an optional Nucleus-Nano R / S cable (for camcorders that support this function , Since the BMPCC 4K camera did not authorize the recording protocol, the handle recording function is currently not effective with the 4K BMPCC.) Battery and motor are not included. Customer can order the Nucleus N motor and motor power cord separately to work together with the handle. This handle can now only work with Tilta BMPCC 4K/6K GH5 6300 6400 XT3 Z7 rig set. Tilta will have a rig for other cameras in the future. We will update the compatible Tilta cage model in the future. The side hanlde can only work with the specific Tilta cage model. The side handle is not compatible with any other brand cage such as smallrig. Follow the calibrate focus wheel: grab the handle and hold the wheel forward. Long press the REC button and press the CAL button twice. Release the button after the LED light turns blue. Turn the wheel clockwise to the end, then double click the CAL button. LED light turns blue and flicker. Turn the wheel counterclockwise to the end, then double click the CAL button. LED light turns green.