Teuypty LM3886 High-Fidelity Stereo Amplifier Board, Low Noise, Distortion, Power Audio Board

Prices from
37.58

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon 1. This power amplifier board cannot be directly connected to a transformer. The output of the transformer should be connected to the power board first, and then connected to the power part of this board from the power board output. Be careful not to connect the positive and negative stages incorrectly! 1. The board is a 1.6 fiberglass board with dimensions of 105 * 55mm and a chip hole spacing of 51mm. Widen the wiring of the output section and leave a high current tin wire! 2. This board uses DC power supply, and the smaller the impedance of the speaker, the larger the output current and heat generation. 3. During power on testing, the signal input terminal on the board should be connected to the load and not suspended, otherwise there be induced noise. Shielded wires should be used for signal lines as much as possible.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 37.58

Description (1)

1. This power amplifier board cannot be directly connected to a transformer. The output of the transformer should be connected to the power board first, and then connected to the power part of this board from the power board output. Be careful not to connect the positive and negative stages incorrectly! 1. The board is a 1.6 fiberglass board with dimensions of 105 * 55mm and a chip hole spacing of 51mm. Widen the wiring of the output section and leave a high current tin wire! 2. This board uses DC power supply, and the smaller the impedance of the speaker, the larger the output current and heat generation. 3. During power on testing, the signal input terminal on the board should be connected to the load and not suspended, otherwise there be induced noise. Shielded wires should be used for signal lines as much as possible.


Product specifications

Brand Teuypty
EAN
  • 6033049713987

Featured Choice
€ 37.58
To Shop