TECNOULAB 5pcs 2S 20A 7.4V 8.4V 18650 Lithium Battery Protection Board Balance Version BMS

Prices from
18.18

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon 【2S20A】 2S 20A 7.4V 8.4V 18650 BMS Balance version lithium battery protection board. Product size: 45 x 15 x 3.4 mm (standard), 48 x 20 x 3.4 mm (balance). Charging voltage: 8.4V - 9.0V. 【Compact Design】Applicable scope: suitable for lithium batteries with rated voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, lithium polymer batteries, no limitation on dimensions). 【Description】 Current continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the use of charging current); Continuous charging current (upper limit): 10A; Balanced version: Suitable for starting currents below 25A and less than 50W electric drills, or resistive loads below 168W, with balanced load function. 【Note】Note 1: Successful start of an electric drill requires two 10C-20C electric batteries, or four ordinary 5C-10C (18650 electric batteries cannot start drilling!!! ); 0V and 8.4V cable, use 2mm square over the copper wire (Nickel plate cannot be used!!! ); Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it must be charged before output. 【Note】 Note 3: When the battery is charged, the heating by resistor "430" is a normal phenomenon, indicating that the equalization circuit is working; If the resistor "430" is also heating up in the state of not charging, check whether the wrong line is connected. The internal capacity/resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = use effect of 2 batteries).

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 18.18

Description (1)

【2S20A】 2S 20A 7.4V 8.4V 18650 BMS Balance version lithium battery protection board. Product size: 45 x 15 x 3.4 mm (standard), 48 x 20 x 3.4 mm (balance). Charging voltage: 8.4V - 9.0V. 【Compact Design】Applicable scope: suitable for lithium batteries with rated voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, lithium polymer batteries, no limitation on dimensions). 【Description】 Current continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the use of charging current); Continuous charging current (upper limit): 10A; Balanced version: Suitable for starting currents below 25A and less than 50W electric drills, or resistive loads below 168W, with balanced load function. 【Note】Note 1: Successful start of an electric drill requires two 10C-20C electric batteries, or four ordinary 5C-10C (18650 electric batteries cannot start drilling!!! ); 0V and 8.4V cable, use 2mm square over the copper wire (Nickel plate cannot be used!!! ); Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it must be charged before output. 【Note】 Note 3: When the battery is charged, the heating by resistor "430" is a normal phenomenon, indicating that the equalization circuit is working; If the resistor "430" is also heating up in the state of not charging, check whether the wrong line is connected. The internal capacity/resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = use effect of 2 batteries).


Product specifications

Brand TECNOULAB
EAN
  • 7427307066707

Featured Choice
€ 18.18
To Shop