Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
【EGS002】EGS002 driver module (EG8010 + IR2110) + pure sine wave inverter LCD driver board. EG8010 a digital function offering its own dead time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or power supply frequency transformer enhancement architecture Single-stage DC-AC, an external 12MHz crystal oscillator, to achieve high precision. 【Simple Operation】The chip uses CMOS technology, internal integration of SPWM sine wave generator, dead time control circuit, multiplication factor range, soft start circuit, protection circuit, interface RS232 serial communication interface and the functions of the 1602 serial LCD driver module. 【Description】12 MHz external crystal oscillator; PWM carrier frequency 23.4 KHz; Real-time feedback on voltage, current and temperature; Protection against overvoltage, undervoltage, overcurrent and overheating; Soft boot mode pin setting Response time 1S; Serial communication to set the output voltage, frequency and other external parameters. 【High Performance】The pin configures four kinds of pure sine wave output frequency: 50Hz fixed frequency pure sine wave; Fixed frequency pure sine wave 60 Hz; Pure sine wave frequency 0-100Hz is adjustable; The pure sine wave frequency 0-400Hz is adjustable. 【LCD Screen Description】When using the LCD screen, you need to use a shielded cable to connect the EGS002 controller board and LCD cable; Otherwise, the high voltage and high current environment of the inverter will seriously interfere with the operation of the controller board. Unipolar and bipolar modulation. Comes with deadband control, 4-pin deadtime configuration: deadtime 300 nS; 500 nS dead time; 1.0 uS dead time; Dead time of 1.5 uS.