Amazon

TECNOIOT 2pcs HC 06 Arduino HC06 Wireless Bluetooth Module with Slave Base for

Name: TECNOIOT 2pcs HC 06 Arduino HC06 Wireless Bluetooth Module with Slave Base for
Brand: TECNOIOT
SKU: ba8d29ad65cb442b14ce90697a37c6e7

1/1

Image of TECNOIOT 2pcs HC 06 Arduino HC06 Wireless Bluetooth Module with Slave Base for

Amazon Marketplace

Prices from

15.69

Description

Amazon 【HC-06】 The module uses the main IC HC-06. The interface includes VCC, GND, TXD, RXD pins, and an optional LED status pin. The KEY pin for slave mode is inactive. 【Compact Design】Effective range in open space: 10m (can exceed them but without warranty). After pairing, it works as a full-duplex serial port. Only support 8-bit data format, 1 bit stop, no parity. Compact size (3.5 cm x 1.5 cm). 【Simple Operation】 LED indicates status: flashing = waiting for connection, steady on = connected and door open. Power supply: 3.6V - 6V via LDO at 3.3V, current ~30mA (not coupled), ~10mA (paired). Do not exceed 7V! 3.3V logical level interface, directly connect to various MCUs (51, AVR, PIC, ARM, MSP430, etc.). Also 5V MCU can connect directly. 【Compatibility】 After setting speed, name, PIN and other parameters via AT commands, the settings are stored. It will automatically switch to transfer mode after Bluetooth connection.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

€ 15.69

Description (1)

【HC-06】 The module uses the main IC HC-06. The interface includes VCC, GND, TXD, RXD pins, and an optional LED status pin. The KEY pin for slave mode is inactive. 【Compact Design】Effective range in open space: 10m (can exceed them but without warranty). After pairing, it works as a full-duplex serial port. Only support 8-bit data format, 1 bit stop, no parity. Compact size (3.5 cm x 1.5 cm). 【Simple Operation】 LED indicates status: flashing = waiting for connection, steady on = connected and door open. Power supply: 3.6V - 6V via LDO at 3.3V, current ~30mA (not coupled), ~10mA (paired). Do not exceed 7V! 3.3V logical level interface, directly connect to various MCUs (51, AVR, PIC, ARM, MSP430, etc.). Also 5V MCU can connect directly. 【Compatibility】 After setting speed, name, PIN and other parameters via AT commands, the settings are stored. It will automatically switch to transfer mode after Bluetooth connection.