Tec7 Trans Clear

Tec7 Trans Clear is a transparent universal adhesive sealant with very good adhesion to various materials such as tiles, cement-based materials, natural stone, wood, concrete, glass and aluminum. This adhesive is odourless and also adheres to wet substrates. In addition, Tec7 is fungus and bacteria resistant and easy to use. Features of Tec7 Trans Clear  Transparent. After curing, it is super strong and permanently elastic. Free of solvents and isocyanates. Safe on mirrors, no markings on natural stone. Almost odourless. Can even be used on wet surfaces. Fungus- and bacteria-resistant. Water and airtight. Can be used on most building materials.   Directions for use Use Tec7 Trans Clear at a temperature between +5°C and +40°C and apply to a clean, dust- and grease-free surface. Use Tec7 Prepare & Finish to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean. Use HP Clean for finishing on porous materials. Apply the adhesive with a manual or pneumatic caulking gun. Due to the wide variety of varnishes and paints on the market we recommend preliminary tests. Using products based on alkyd resins may delay the drying process. Test adhesion to plastics, powder coatings, exotic woods and bituminous materials.   Start by strengthening weak and/or porous substrates with epoxy primer. When gluing mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnant moisture due to condensation. The ideal adhesive thickness for optimal adhesion strength is 3 mm. Specifications Contents: 310 ml cartridgeBase: MS polymerAppearance: elastic pasteColour: crystal clearFlow: 160 g/min (5 bar / 3 mm / 23°C)Application: caulking gun 290-310 ml Skin formation: 5 minutes (23°C 50% RH) Tack-free: 40 minutes (23°C 50% RH)Full hardening: 24 - 72 hours (23°C 50% RH)Adhesion: Excellent on: tiles, cement, natural stone, wood, concrete, aluminum, with the exception of PP, PE, PTFE and bitumen. Lower adhesion on: PE, PP, PTFE and Bitumen UV resistance: discolouration may occur over time due to external influencesPaintable: with most solvent- and water-based lacquersChemical resistance:  Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, alkalis. Moderate: esters, ketones and aromatics. Poor: concentrated acids, chlorinated solvents. Shelf life: 12 months, in closed original packaging, dry, cool and frost-free