€ 59.62
SMALLRIG D TAP to NP FZ100 Dummy Battery, Power Cable for Sony A7/A7R/A7S series, A7C/A7C II, A1/A9 A6600/A6700, FX3/FX30, ZV E1 Cameras 4253B
Prices from
59.62
Sponsored links
|
|
€ 59.62 |
To Shop
|
| COMPARE ALL WEBSHOPS (1) | ||
Description
Amazon
Continuous Power Supply: A dummy battery allows you to use the D-TAP connector to continuously power your camera from an external power. This means that you don't have to worry about changing the battery or the battery will overheat and lose power due to prolonged recording. However, you need to pay attention to the fact that the dummy battery lasts about 4 hours at a time, after which it will remind you that the battery level is too low, which is normal. You can reset the dummy battery to full charge by disconnecting and restarting it. Wide compatibility: This dummy battery replaces the Sony NP-FZ100 and works for Sony Alpha A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II. WORKS WELL WITH V MOUNT BATTERY - This dummy battery works well with most V Mount batteries on the market with the D-TAP output. And we recommend using it with the SmallRig V mount battery. SmallRig V mount battery has over-current and over-voltage protection, so don't worry about damaging your camera. NO WARNING:Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original battery of the camera, so no need to worry about it getting plugged in. SAFE AND RELIABLE - Over-voltage, overheating and overload short circuit protection along with fire resistant PVC and ABS make this item safe and reliable. How to use: 1Connect the dummy battery to the V-mount battery; 2Insert the dummy powered battery into the camera battery compartment; 3Close the battery compartment cover. Please follow the assembly steps during use. If the camera battery compartment is not closed, the dummy battery will not work normally.
Compare webshops (1)
Sponsored links · Some shops pay us a fee
Sort by:
Shops with other sizes
Description
(1)
Continuous Power Supply: A dummy battery allows you to use the D-TAP connector to continuously power your camera from an external power. This means that you don't have to worry about changing the battery or the battery will overheat and lose power due to prolonged recording. However, you need to pay attention to the fact that the dummy battery lasts about 4 hours at a time, after which it will remind you that the battery level is too low, which is normal. You can reset the dummy battery to full charge by disconnecting and restarting it. Wide compatibility: This dummy battery replaces the Sony NP-FZ100 and works for Sony Alpha A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II. WORKS WELL WITH V MOUNT BATTERY - This dummy battery works well with most V Mount batteries on the market with the D-TAP output. And we recommend using it with the SmallRig V mount battery. SmallRig V mount battery has over-current and over-voltage protection, so don't worry about damaging your camera. NO WARNING:Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original battery of the camera, so no need to worry about it getting plugged in. SAFE AND RELIABLE - Over-voltage, overheating and overload short circuit protection along with fire resistant PVC and ABS make this item safe and reliable. How to use: 1Connect the dummy battery to the V-mount battery; 2Insert the dummy powered battery into the camera battery compartment; 3Close the battery compartment cover. Please follow the assembly steps during use. If the camera battery compartment is not closed, the dummy battery will not work normally.
Product specifications
Related results
Featured Choice
€ 59.62
