Sharkoon RGB Flow Black Mid Tower Case

Go with the flow The RGB flow is equipped with addressable LED strips which visually connect the front and side panel. Both strips are daisy Chained and can be easily operated using the four-port RGB controller which is integrated in the case. Fourteen illumination modes can be selected using the case’s reset switch Optimal airflow beneath the LED strip on the front panel, The ATX Midi Tower is equipped with a fine mesh grille, ensuring an optimal intake of air which is supplied by the pre-installed 120 mm fan. If desired, five more fans can be installed within the case. Despite the compact design, The RGB flow also has room for radiators, with 6.4 cm provided behind the front panel and 5.5 cm Under the top panel Window with RGB highlight the RGB flow has a side panel made of tempered glass, behind which the installed hardware is displayed. In addition, the hardware is put into perspective, illuminated in a choice of colours Thanks to the LED strip at the bottom of the glass panel Compact design with power supply tunnel Graphics cards with a length of up to 35 cm have room underneath a CPU cooler with a height of up to 15.7 cm. Power supplies with a maximum length of 21.5 cm can disappear inside the power supply tunnel on the bottom panel of the case Variable installation of drives the case can house up to six SSDs, which can be mounted on the power supply tunnel or on the back of the mainboard tray. The HDD/SSD cage offers space for either two more SSDs or two 3.5“ hard drives