Saaygdfg 1 to 5/6 Way PWM Fan Hub 4 Pin Sleeved Braided Splitter Cable for PC CPU Cooler Case 12V Desktop Computer Adapter(1 5 HUB)

Prices from
38.87

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon 🖥️ EXPAND 1 HEADER TO 5/6 FANS – INSTANT AIRFLOW UPGRADE – Motherboard running out of fan ports? This PWM hub turns a single 4-pin motherboard header into 5 (or 6) ports. Connect CPU cooler plus multiple chassis fans instantly – no more daisy-chaining splitters or leaving fans unplugged. Perfect for high‑airflow gaming rigs and multi‑fan cases. ⚡ PWM SPEED SYNC – & QUIET – Tired of fans roaring at 100% speed 24/7? The hub faithfully passes your motherboard’s PWM (Pulse Width Modulation) control signal to all connected 4‑pin fans, so speed ramps up when your system heats up and drops to silent idle when it doesn’t. Enjoy dynamic thermal management without additional software. Note: 3‑pin DC fans on this hub will run at full speed (no PWM control). 🔌 4‑PIN & 3‑PIN UNIVERSAL COMPATIBILITY – Not sure if your existing fans will work? Supports all standard 12V CPU and case cooling fans with both 4‑pin PWM and 3‑pin DC connectors. Works seamlessly with CPU air coolers, AIO radiators, RGB and non‑RGB chassis fans of any . 🧵 SLEEVED BRAIDED CABLE + TOOL‑FREE MOUNTING – Messy exposed cables ruining your PC aesthetics? Main cable wrapped in durable black nylon braided sleeving, offering enhanced wear resistance and a clean, professional look inside your case. Pre‑installed 3M tape on the back allows tool‑free mounting – simply stick the hub to any flat chassis surface for instant cable management. 🔒 RPM SIGNAL & POWER LIMIT – READ BEFORE USE – BIOS will only detect fan speed from Port 1 (the CPU‑marked port), with other ports showing 0 RPM – this is normal passive hub behavior. Total output capacity is 12V 2A (24W). Standard 120mm fans typically draw 0.2‑0.3A each, making 5‑6 fans safe to run. High‑power industrial fans (≥0.4A) are not recommended without active external power.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 38.87

Description (1)

🖥️ EXPAND 1 HEADER TO 5/6 FANS – INSTANT AIRFLOW UPGRADE – Motherboard running out of fan ports? This PWM hub turns a single 4-pin motherboard header into 5 (or 6) ports. Connect CPU cooler plus multiple chassis fans instantly – no more daisy-chaining splitters or leaving fans unplugged. Perfect for high‑airflow gaming rigs and multi‑fan cases. ⚡ PWM SPEED SYNC – & QUIET – Tired of fans roaring at 100% speed 24/7? The hub faithfully passes your motherboard’s PWM (Pulse Width Modulation) control signal to all connected 4‑pin fans, so speed ramps up when your system heats up and drops to silent idle when it doesn’t. Enjoy dynamic thermal management without additional software. Note: 3‑pin DC fans on this hub will run at full speed (no PWM control). 🔌 4‑PIN & 3‑PIN UNIVERSAL COMPATIBILITY – Not sure if your existing fans will work? Supports all standard 12V CPU and case cooling fans with both 4‑pin PWM and 3‑pin DC connectors. Works seamlessly with CPU air coolers, AIO radiators, RGB and non‑RGB chassis fans of any . 🧵 SLEEVED BRAIDED CABLE + TOOL‑FREE MOUNTING – Messy exposed cables ruining your PC aesthetics? Main cable wrapped in durable black nylon braided sleeving, offering enhanced wear resistance and a clean, professional look inside your case. Pre‑installed 3M tape on the back allows tool‑free mounting – simply stick the hub to any flat chassis surface for instant cable management. 🔒 RPM SIGNAL & POWER LIMIT – READ BEFORE USE – BIOS will only detect fan speed from Port 1 (the CPU‑marked port), with other ports showing 0 RPM – this is normal passive hub behavior. Total output capacity is 12V 2A (24W). Standard 120mm fans typically draw 0.2‑0.3A each, making 5‑6 fans safe to run. High‑power industrial fans (≥0.4A) are not recommended without active external power.


Product specifications

Brand Saaygdfg
EAN
  • 8761258669341

Featured Choice
€ 38.87
To Shop