Renogy 60A MPPT Charge Controller, 12/24/36/48V Solar Controller Panel with LCD Screen for AGM, Gel and Lithium Batteries

[Maximum charging current/input voltage/input power] The maximum charging current is 60A, the maximum input voltage is 150VDC and the maximum input power 800W for a 12V system, 1600W for a 24V system, 2400W for a 36V system and 3200W for a 48V system. Automatically detects 12 V / 24 V / 36 V / 48 V system: it automatically detects the system voltage of 12 V / 24 V / 36 V / 48 V and applies it to different batteries such as gel and lithium batteries. [High Tracking Efficiency & Protection Function] MPPT technology allows high tracking efficiency of 99%. As a result, more electricity can be generated without waste by maximising the properties of the solar panel and reducing power generation loss. It also has a comprehensive self-diagnosis and protection function to prevent overcharging, deep discharge, overload and short circuit. [With LED LCD Screen] With an LED LCD screen, you can check the status such as charging current and battery voltage in real time. The early detection of abnormalities in the number values can be reacted quickly. If an error occurs, an error code is displayed so that the cause can be easily identified. With load connection: small electrical devices such as a DC (DC) bulb can be connected to the load port (load port). By setting the load mode, you can set the operating time of the load and switch between manual and automatic. (For details of each mode, please refer to the manual.) Remote monitoring and operation via Bluetooth moudl: This charge controller can be connected to the Renogy BT-1 Bluetooth module (should be ordered separately) to monitor the operating status of the system in real time via the app. You can also change the settings of each parameter in the app, so you don't have to operate the actual device.