Rainbow Flames Hydrographic Film Water Printing Hydro Dip 50cmX100cm

4. ACTIVATION & DIPPING - Lay the film in the water. Make the 'sticky side' Remove creases/folds or underneath the print by blowing it lightly. Wait 60-80 seconds before activating it. the activator as as much as possible and without much disturbance on the water. Once properly activated, submerge your subject by into the water on an angle to avoid trapping . 3. THE BASECOLOR - Paint your preferred basecolor. of the patterns are transparent so it a color of would greatly affect your overall output. 2. PRIMER PAINT - the appropriate primer for your substrate. It may whether a metal, plastic, fiberglass, ceramic or wood. your local paint shop for the best option with your market . 1. PREPARATION - Make the item has been stripped of grease, dirt and gunks and other stuff may interfere with the adhesion of . Durability of any hydrographics coat depends upon complete and careful preparation of the before . The should be even and smooth. Any cracks, and holes or any other imperfections do not let the paint adhere correctly to the . Inadequate preparation results into majority of failures. 5. WASH - Wash your dipped item using a running water to the sticky residues left by the print and let it dry for a while.