Polymaker HT-PLA-GF Filament 1.75 mm, Power Tool, High Temperature PLA for 3D Printing, Heat Resistant up to 150C, Easy Print, Lubricate, Works with the

HIGH HEAT STABILITY - Withstands temperatures up to 130°C, making it ideal for hot environments such as garages, car interiors or sun-exposed surfaces. HT-PLA-GF resists warping or deformation - perfect for garden tools, garage organizers and vehicle parts. Effortless printing: HT-PLA-GF prints with PLA-like ease while supporting speeds up to 350mm/s. Delivers smooth extrusion, minimal clogging, and excellent dimensional accuracy, making it a reliable choice for print farms and high throughput production operations. HT-PLA vs HT-PLA-GF - HT-PLA offers high heat resistance with the same strength as normal PLA, making it ideal for aesthetic or non-load-bearing prints. For added rigidity, strength and annealability, HT-PLA-GF is the better choice for functional parts. SHIPPING & STOCK READY Designed to maintain shape and print quality during long haul shipping or extended storage. HT-PLA-GF resists heat-related deformation, making it ideal for printed parts that need to be stored, transported or distributed without structural loss. SUPERIOR SURFACE FINISHING - Achieve a textured, satin finish with minimal post-processing. HT-PLA-GF prints cleanly and consistently, making it ideal for parts where both function and appearance are important - such as garage brackets, exterior enclosures or exposed use prints. Spool Packaging & Feed - Each spool is made of rigid cardboard with reinforced edges for smooth feeding and minimal dust. Compatible with AMS, dry boxes and most bobbin holders; Easy to store, easy to load - optimized for efficiency in organized print setups. MADE FOR MANUFACTURERS AND ENGINEERS - Trusted by engineers, hobbyists and printers alike, HT-PLA-GF delivers reliable results in all production batches. Ideal for repeatable printing of strong parts such as workbench tools, jigs, jigs or machine finished prototypes. Recommended Hardened Nozzle: HT-PLA-GF contains glass fibers and can wear out standard brass nozzles over time. Use a hardened steel or ruby tip nozzle for optimal performance, consistent extrusion, and to extend the life of your hotend components during extended jobs. GLOW FOR PERFORMANCE - Unlock greater thermal performance by annealing prints at 100 C for 30 minutes. Annealing improves heat deflection and dimensional stability - ideal for parts used in warm environments or under repeated functional loads. REINFORCED FUNCTIONALITY - HT-PLA-GF is fiberglass reinforced for added rigidity and reliability. Ideal for tool holders, mechanical mounts, and functional cases where dimensional accuracy and heat resistance are critical to long-term performance.