Polymaker Fiberon PA6 GF Glass Fiber Nylon Filament 1.75 Grey 500g, Enhanced Hard Edge Cardboard Spool, Warp Free 1.75mm 3D Printing

【Fiberon by Polymaker】- A new product family of Polymaker dedicated to democratizing high-performance composite materials. It offers cost-effective composite 3D printing filament especially optimized for high-speed printing. With superior printability and high printer compatibility, it enables high-performance parts on most mainstream printers, including entry-level printers 【Stiff & Strong & Heat Resistant Nylon Filament】 - Polymaker Fiberon PA6-GF nylon filament 1.75mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion 【Wide Application】 - Fiberon PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles 【Tangle Free & Resealable Bag】 - Fiberon PA6-GF nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use 【Cardboard Spool with Enhanced Hard Edge】 - Fiberon filament comes in upgraded packaging, featuring an enhanced coating on the edge and a fully recycled cardboard spool and box. The hard edge not only prevents the dust from fraying cardboard but also protects the edge from deformation and delamination 【Printing Settings】 - Nozzle: 280-300˚C; Bed: 40-50˚C; Speed: Up to 300mm/s 【Note】- It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. Fiberon PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a desiccant box while printing

Polymaker Fiberon PA6-GF25 filament is nylon6 reinforced with glass fibres. This gives it excellent thermal and mechanical properties, without compromising interlayer adhesion. This product is grey in colour, 1.75mm and comes on a 0.5kg spool.Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.