PLOSON SY-2-8 Marine Supplies Multi-Signal Distributor NMEA0183 NMEA Buffer Splitter 2 in 4 Converter 10-36V

Prices from
137.31

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon The NMEA Buffer is a plug-and-play device that expands and distributes NMEA 0183 data.This device supports two input modes and can be quickly deployed through simple cable wiring.It’s suitable for various maritime applicatins,including marine electronic equipment and navigation systems. Packing List Package contents: 1.NMEA208 buffer ×1 2.Mounting screws ×4 3.Fixed cable posts ×6 Step 2:Power Connection Connect the DC+ (10-36V) wire to the POWER_IN "+" port of the NMEA Buffer,and the DC- wire to the POWER_IN "-" port. Ensure all connections are secure and tight. Step 3:Mode Selection Before wiring, use small tweezers or a thin stick to set all switches of the SW1 switch to select the mode: All switches left (←): independent mode (A input → output to A1-4 only; B input → output to B1-4 only) All switches right (→): merge mode (A/B input → output to both A1-4 and B1-4, all 8 ports) Step 4:Connecting NMEA 0183 Devices A.Independent mode(All switches left ←) Connect the "TX+" and "TX-" of the NMEA 0183 device in pairs to the input ports: Connect to the INA+ and INA- ports. Data entering from the A port will be output from OUT A1-4. Connect to the INB+ and INB- ports. Data entering from the B port will be output from OUT B1-4. Step 1:Open The Device Cover Use a suitable screwdriver to loosen the fixing screws on both sides of the NMEA Buffer.Then,carefully separate the upper and lower covers to expose the wiring terminal.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 137.31

Description (1)

The NMEA Buffer is a plug-and-play device that expands and distributes NMEA 0183 data.This device supports two input modes and can be quickly deployed through simple cable wiring.It’s suitable for various maritime applicatins,including marine electronic equipment and navigation systems. Packing List Package contents: 1.NMEA208 buffer ×1 2.Mounting screws ×4 3.Fixed cable posts ×6 Step 2:Power Connection Connect the DC+ (10-36V) wire to the POWER_IN "+" port of the NMEA Buffer,and the DC- wire to the POWER_IN "-" port. Ensure all connections are secure and tight. Step 3:Mode Selection Before wiring, use small tweezers or a thin stick to set all switches of the SW1 switch to select the mode: All switches left (←): independent mode (A input → output to A1-4 only; B input → output to B1-4 only) All switches right (→): merge mode (A/B input → output to both A1-4 and B1-4, all 8 ports) Step 4:Connecting NMEA 0183 Devices A.Independent mode(All switches left ←) Connect the "TX+" and "TX-" of the NMEA 0183 device in pairs to the input ports: Connect to the INA+ and INA- ports. Data entering from the A port will be output from OUT A1-4. Connect to the INB+ and INB- ports. Data entering from the B port will be output from OUT B1-4. Step 1:Open The Device Cover Use a suitable screwdriver to loosen the fixing screws on both sides of the NMEA Buffer.Then,carefully separate the upper and lower covers to expose the wiring terminal.


Product specifications

Brand PLOSON
EAN
  • 6977335201461

Featured Choice
€ 137.31
To Shop