OUXI 10 Inch Scooter Tyres with Inner Tube x 2.125 Outdoor and for Electric 0 Valve Angle Non-Slip Rubber 3 Mounting Tools

10 inch tyre: this tyre is suitable for scooters with a wheel outer diameter of 254 mm (10 inches), inner diameter of 155 mm (6.1 inches), side width of 54 mm (2.125 inches). Please confirm the size corresponds to your needs before purchasing. It is perfectly compatible with the front and rear wheels of most electric scooters. But not suitable for some scooters with smaller 6.5 inch tyres. Please confirm that the size meets your needs before you buy. Inflation tips: Recommended inflation pressure for the hose: PSI 36. Please make sure to adjust and inflate the hose according to the recommended inflation pressure, otherwise it will burst easily. 0° valve design: This curved valve design is easier to inflate than straight valves and fits most 10 inch tyres. You will receive 2 10 × 2.125 outer tyres, 2 10 × 2.125 inner tubes, 3 crowbars and 2 wrenches. Extra thick material: our hose is made of thick, shock-absorbing butyl rubber, which is superior to natural rubber and has chemical resistance, weather resistance, tear resistance and abrasion resistance. Excellent service: Before installation, place the inner hose in the water to check whether it is completely sealed. If there are air bubbles, it is damaged. Please contact us first, we promise to send you a new package. Before assembly, check the inside of the outer tyre to prevent sharp objects such as sand and gravel remaining in the outer tyre from piercing the inner tube.