Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Chain tensioner spring loaded for 49cc 66cc 80cc Engine Motorized Bike. STEP 1: It is easier to connect one side of the spring to the curved side of the mounting plate, this side has 2 small holes. : In the tensioner Among the 5 screws/bolts, 2 lock nuts and 2 washers included in the kit, use only small screws/bolts and lock nuts to connect the tensioner to the mounting plate. Chain roller tensioner ensures proper tension and alignment of the chain. It can prevent the chain from derailing, excessive wear of the sprocket and prolong the life of the chain. If the chain is not properly tensioned, it be lost or broken. Eventually the side cover and stator plate be damaged. Step 3: Remove the old screws from the housing cover, place the tension plate on the housing cover, then use 3 identical screws to install the tension plate on the top of the housing cover and tighten the new screws. Step 4: Take the largest /bolt and add a washer, then the chain tensioner, then another washer, and then lock the nut to any of the 4 large holes on the tensioner (make sure two Washer on the side) Step 5: Connect the spring from the tensioner plate to the tensioner .