Offgridtec Solar Cable H1Z2Z2 K 6 mm², Single Copper for Photovoltaic Systems, UV and Weather Resistant, Halogen Free, Conforms to IEC 60228 EN 50618 (100m, Red)

Offgridtec H1Z2Z2-K cables are weather-resistant, abrasion and UV resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for outdoor use for connecting photovoltaic systems with and without grounding. They are used for wiring between solar modules, as well as for connecting individual strings and inverter. TÜV Rheinland certified according to PfG standard 2 1169/08.2007 (type PV1-F). CONDUCTOR STRUCTURE: 1. Conductor: Flexible tinned copper fine wire strand, conforms to IEC 60228 Class 5, 2 Conductor insulation: electron beam cross-linked polyolefin copolymer, 3. Outer sheath: electron beam cross-linked polyolefin copolymer Nominal voltage: U0/U according to IEC AC 1000/1000 V - DC 1500/1500 V, Maximum system voltage: 1.8 kV DC (conductor/conductor, system unearthed) according to TÜV 2 PfG 1169/08.2007, Test voltage: AC 6.5 kV - DC 15 kV Thermal characteristics: Temperature range in fixed laying: -40 °C to +248 °C max. (conductor temperature according to EN 60216-2), Ambient temperature range: -40 °C to +194 °C (according to TÜV 2 PfG 1169/08.2007), Flexible laying temperature: max. -13 °C, thermal pressure resistance according to EN 60811-3-1, warm-wet test according to EN 60068-2-78 with 85% relative humidity. Mechanical characteristics: Minimum bending radius in case of occasional movement: 4x external diameter, Minimum bending radius in fixed laying: 5x cable diameter, Dynamic penetration resistance according to profile requirements DKE PV1-F AK 411.2.3 Annex F, Resistance to tear propagation according to profile requirements DKE PV1-F AK 411.2.3 Al. TiTiG G tensile and elongation according to EN 60811. Chemical characteristics: Weather and UV resistance according to EN 50618, Ozone resistance according to EN 50396, Method B, Halogen free according to EN 50267, EN 50525-1, Fire behaviour: flame retardant according to IEC 60332-1-2, Acid and alkali resistance according to EN 6088. 11-404 (oxalic acid and sodium hydroxide).