Offgridtec Solar Cable H1Z2Z2-K 4 mm², Single-Core Copper for Photovoltaic Systems, UV and Weather Resistant, Halogen-Free, IEC 60228 EN 50618 Compliant (Red, 10 Metres)

Offgridtec H1Z2Z2-K cables are weatherproof, abrasion- and UV-resistant photovoltaic cables. These halogen-free, double insulated and networked solar cables are suitable for outdoor use to connect grounded and non-grounded photovoltaic systems. They are used for wiring solar panels to each other, as well as for connecting the individual module rows and the inverter. TÜV Rheinland tested according to 2 PfG 1169/08.2007 (PV1-F) design. Conductor construction: 1. Conductor: Fine-stranded wire made of tinned copper wires, according to IEC 60228 class 5, 2. Wire insulation: electron beam crosslinked polyolefin co-polymer, 3. Outer sheath electron beam crosslinked polyolefin co-polymer. Rated voltage: U0 /U according to IEC AC 1000/1000V - DC 1500/1500V, max. Permissible system voltage: 1.8 kV DC (conductor/conductor, non-grounded system) according to TÜV 2 PfG 1169/08.2007 test voltage AC 6.5 kV - DC 15 kV Thermal properties: fixed temperature range: -40 °C to +120 °C max., conductor temperature (according to EN 60216-2), fixed temperature range: -40 °C to +90 °C, ambient temperature (according to TÜV 2 PfG 1169/08.2007), flexible installation temperature. Max. eel -25 °C, heat pressure resistance according to EN 60811-3-1, humidity and heat test according to EN 60068-2-78 at 85% humidity. Mechanical features: Minimum bending radius if occasionally moved: 4x outer diameter, minimum bending radius when fixed: 5 x cable diameter, dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Appendix F, tear resistance according to DKE requirement profile PV1-F AK 411.2.3. 11.2.3 Annex G, test of tear strength and elongation according to EN 60811. Chemical properties: weather/UV resistance according to EN 50618, ozone resistance according to EN 50396, method B, halogen free according to EN 50267, EN 50525-1, fire behaviour flame retardant according to IEC 60332-1-2, acid and alkali resistance according to EN 60811-404. Oxalic acid and caustic soda).