LTC4311 I2C Extender Active Terminator,DC 1.6V-5.5V Improve Bus Rise Time Conversion

Prices from
21.83

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon I2C stands for Inter Integrated Circuit Communication and is suitable for short-range communications on PCBs or components. But hey, we're engineers and we like to push the boundaries of technology, don't we? So why not try running I2C on cables that are one meter long or even longer? Well, if you try to do this, you'll soon find that the cable length increases capacity and resistance, slowing down the open-drain recall speed used in I2C, making it difficult to use a clock speed of 100 kHz+. You can try to slow down the I2C clock to 1 kHz. Alternatively Using This Card Is Simple: Connect it to the I2C bus at the beginning of the channel (if you don't have a long cable, you can also try at the end of the channel). When the chip is powered on and activated, it will monitor the SCL and SDA lines. When she sees them pulled up through the I2C resistor, it will activate and discharge current to boost them through the top power rail. You can now achieve faster data rates without the need for long resistors and cables. We easily operated a 400kHz OLED on a 3m long phone line. For a 100 kHz signal, we even ran the BME680 on a 100-foot Ethernet (about 3,000 pF round trip!) and used OLED to display sensor details. It can operate at any bus voltage from 1.6V to 5.5V, with SCL speeds up to 400KHz and cables up to 4000pF. No firmware, software or special configuration required. Simply plug the power, ground, SCL and SDA connectors into the bus. BUY WITH CONFIDENCE: To provide you with the highest quality service, if you have any questions, please contact us. We will provide after-sales service until you are satisfied.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 21.83

Description (1)

I2C stands for Inter Integrated Circuit Communication and is suitable for short-range communications on PCBs or components. But hey, we're engineers and we like to push the boundaries of technology, don't we? So why not try running I2C on cables that are one meter long or even longer? Well, if you try to do this, you'll soon find that the cable length increases capacity and resistance, slowing down the open-drain recall speed used in I2C, making it difficult to use a clock speed of 100 kHz+. You can try to slow down the I2C clock to 1 kHz. Alternatively Using This Card Is Simple: Connect it to the I2C bus at the beginning of the channel (if you don't have a long cable, you can also try at the end of the channel). When the chip is powered on and activated, it will monitor the SCL and SDA lines. When she sees them pulled up through the I2C resistor, it will activate and discharge current to boost them through the top power rail. You can now achieve faster data rates without the need for long resistors and cables. We easily operated a 400kHz OLED on a 3m long phone line. For a 100 kHz signal, we even ran the BME680 on a 100-foot Ethernet (about 3,000 pF round trip!) and used OLED to display sensor details. It can operate at any bus voltage from 1.6V to 5.5V, with SCL speeds up to 400KHz and cables up to 4000pF. No firmware, software or special configuration required. Simply plug the power, ground, SCL and SDA connectors into the bus. BUY WITH CONFIDENCE: To provide you with the highest quality service, if you have any questions, please contact us. We will provide after-sales service until you are satisfied.


Product specifications

Brand DONGKER
EAN
  • 0762926182245

Featured Choice
€ 21.83
To Shop