lilila-ree for Corsair Modular Power Supply 6 Pin Male to 3X 4 Molex Female Hard Drive Adapter Cable BTC Mining Riser Card 20-in

🔹 EXPAND YOUR MINING RIG’S POWER CONNECTIVITY – 3X 4 PIN MOLEX OUTPUT This 6 Pin Male to 3X 4 Pin Molex power cable converts a single 6-pin port on your compatible Corsair modular power supply into three 4-pin Molex connectors. Perfect for powering BTC mining riser cards, hard drives, SSDs, fan controllers, and other peripherals from a single PSU port. Simplifies cable management in multi-GPU mining builds. 🔹 COMPATIBLE WITH CORSAIR TYPE 3 & TYPE 4 MODULAR PSUs Designed for Corsair modular power supplies. Compatible with: RM / RMX / RMi series HX / HXi series CX / CX-M series CS / CS-M series SF series TX / TX-M series AXi / AX series ⚠️ NOT compatible with Corsair AX1200, AX750, AX850, SF-L series, Type 5 PSUs, or any non-Corsair PSU. Corsair Type 3 and Type 4 cables share the same PATA/SATA/Peripheral pinout; the only difference is the 24-pin ATX cable. Type 3 and Type 4 cables are not compatible with Type 5 power supplies. 🔹 PREMIUM 18AWG CONSTRUCTION – SAFE & RELIABLE FOR MINING Built with high-quality 18AWG tinned copper wire for efficient power delivery and minimal voltage drop. UL1007 certified materials ensure safety and durability. The secure latching 6-pin connector provides a safe connection to your PSU. Depress the latch before unplugging. 🔹 OPTIMAL CABLE LENGTH – 50cm + 15cm + 15cm + 15cm Main cable measures 50cm from the PSU to the first connector, with three 15cm secondary leads between each 4-pin Molex output. Provides ample length for clean cable routing in mining frames, full-tower, mid-tower, and compact PC cases. 🔹 PLUG & PLAY – KIT INCLUDES & WARRANTY 1x 6 Pin Male to 3X 4 Pin Molex Power Cable (50cm+15cm+15cm+15cm, 18AWG). Backed by a 2-year warranty against manufacturing defects. Works with BTC mining riser cards, hard drives, SSDs, optical drives, fan controllers, and other peripherals from major brands. ⚠️ CRITICAL COMPATIBILITY & LOAD WARNINGS： This is a peripheral/Molex power cable, NOT a PCIe or CPU cable. The 6-pin end must connect to a peripheral 6-pin port on your PSU, NOT a PCIe 6-pin or CPU 8-pin port. BTC Mining Load Limit: Connect no more than 2 riser cards per cable. Connecting 3 risers to a single cable can cause overheating and cable damage. This cable is directional – the 6-pin end goes to the PSU; the 3x 4-pin Molex ends go to your devices. 18AWG wire can handle approximately 10A at 12V (about 120W) per string – do not exceed this limit.