Kznifmk Network Cable Tester -8506 Supporting Test/IP Analysis/Network Port Speed Multifunction Tracking Search Tool

Switch test: After the test, the test result show the switch (10M/100M/1000M) as well as the duplex mode of the switch. PS: After testing, customers need to reprocess all steps to test the new port to the accuracy of the test. Settings: Customers can set language, backlight level, backlight duration, automatic default setting, etc. Testing: Customers were suggested to set IPV4 for the time to use the test function. After accessing the test function, clients can use the UP/DOWN buttons to choose "Set IP" to set the local IP, subnet mask and gateway. After setting these settings, clients must save the settings and then can return to use the scan functions. Digital mode: anti-interference, when tracking cables with load from 1000M switches, customers were suggested to use this mode. Analog mode: with little noise, customers have been suggested to use this mode when tracking cables without load. Transmitter: By default set to digital mode, use the UP/DOWN button to switch between the two modes. IP Scan: Use UP/DOWN buttons to choose "Set IP" to set local IP, subnet mask and gateway. After defining these items, clients must save the settings, and then can return to use IP scanning functions. 1. Cable continuity test. 2. Modes: Remote control and switch. 3. Remote: Can test cable continuity, crossover/short circuit conditions. 4. Switch: can only test the continuity of the cable.