Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Then use a short brown cable to connect the rocker switch and live cable (L) of the AC outlet. Use the blue cable to connect the neutral conductor (N) of the AC socket and the neutral conductor (N) of the switching power supply; 5. Use a yellow-green two-tone cable to connect the grounding cable (E) of the AC socket and the earth cable () of the switching power supply. Installation step: 1. Check accessories: check whether the accessories of the S800 match the accessory list or the accessory picture. Note: The case material is a little soft and may be slightly deformed in transportation.If there is a space during assembly, please align it before assembling.2. Check the RD60XX: set the input power supply to 12V/1A to power the RD6012 and set the 5V/1A output on the RD60XX Use 2 red cables to connect the IN+ of the green connector and the positive electrodes (+V) and use 2 black cables to connect the (IN-) of the connectors and the negative electrodes (COM). Install the temperature sensor expansion board on the back. If you need to use external temperature detection, you can connect an external temperature sensor cable. Be at of the case and test. Turn on the output to see if the output is normal.3. Back Board Assembly: Install the rocker switch and AC socket on the bottom board.4. Connect the cables to the power supply of the switch: (dangerous, laymen should not perform the operation); Use a long brown cable to connect the rocker switch and live cable (L) of the switch power supply. Installation step: mount the switching power supply: install the switching power supply on the bottom board