Kcvzitrds 1500 W Upgrade 1800 DC-DC Step-Up Power Supply Module DC10-60V 12-90V Adjustable Voltage Converter Easy Installation to Use

Prices from
37.31

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon Note: 1. The output wiring cannot be reversed or short-circuited. 2. If this is connected to an inductive load, the minimum input voltage should be (e.g. B. 24 V) and the maximum output power is lower (e.g. B. 500W).3. If an input power source is used, a switching power supply, a solar panel or an electric generator, the undervoltage protection value should be set lower, otherwise it may cause damage. LOW INPUT VOLTAGE PROTECTION ADJUSTMENT When we set up low input voltage protection for a 12V battery, we connect the inputs with a voltage of 10V and adjust the RV1 (increase clockwise, decrease counterclockwise) until the UVLO lights up. The protection voltage is now 10V, . if the battery voltage drops to 10V, it not be raised and the output voltage be identical to the input voltage. INSTRUCTIONS Voltage Adjustment Turn on while not connected to the load, then adjust the potentiometer "V-ADJ" clockwise to increase and counterclockwise to decrease. Due to the large output capacity, the response when adjusting the high voltage is slow low voltage. Current setting: set the "CC A-ADJ" potentiometer about 30 circles counterclockwise to minimize the output current before connecting it to the load. Then set "CC A-ADJ" clockwise to the current value you need. If you use it to charge the battery, connect it to the output after it is fully discharged. Because the more remains, the lower the charging current. Specifications:Type:Non-Isolated Upward Module (BOOST) Input voltage: DC10V to 60V Max. Input current: 30A (input voltage 10V to 30V) 2 (input voltage 31V to 60V). Quiescent current: 15mA (increases when converting from 12V to 20V)

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 37.31

Description (1)

Note: 1. The output wiring cannot be reversed or short-circuited. 2. If this is connected to an inductive load, the minimum input voltage should be (e.g. B. 24 V) and the maximum output power is lower (e.g. B. 500W).3. If an input power source is used, a switching power supply, a solar panel or an electric generator, the undervoltage protection value should be set lower, otherwise it may cause damage. LOW INPUT VOLTAGE PROTECTION ADJUSTMENT When we set up low input voltage protection for a 12V battery, we connect the inputs with a voltage of 10V and adjust the RV1 (increase clockwise, decrease counterclockwise) until the UVLO lights up. The protection voltage is now 10V, . if the battery voltage drops to 10V, it not be raised and the output voltage be identical to the input voltage. INSTRUCTIONS Voltage Adjustment Turn on while not connected to the load, then adjust the potentiometer "V-ADJ" clockwise to increase and counterclockwise to decrease. Due to the large output capacity, the response when adjusting the high voltage is slow low voltage. Current setting: set the "CC A-ADJ" potentiometer about 30 circles counterclockwise to minimize the output current before connecting it to the load. Then set "CC A-ADJ" clockwise to the current value you need. If you use it to charge the battery, connect it to the output after it is fully discharged. Because the more remains, the lower the charging current. Specifications:Type:Non-Isolated Upward Module (BOOST) Input voltage: DC10V to 60V Max. Input current: 30A (input voltage 10V to 30V) 2 (input voltage 31V to 60V). Quiescent current: 15mA (increases when converting from 12V to 20V)


Product specifications

Brand Kcvzitrds
EAN
  • 4714158382944

Featured Choice
€ 37.31
To Shop