KALEA INFORMATIQUE mSATA controller card with 2 ports for SATA 6G hard drives. Independent mounting or RAID 0 1

For mounting TWO SATA hard drives in place of one mSATA SSD. Breakaway card compatible with mSATA half (26.8mmx30mm) and full size (50.95x30mm) SSD slots. High-performance ASM1092R chipset. Hardware RAID type 0, 1 or JBOD: selection via on-board switch. SATA3 Rev 3.2 interface (also compatible with SATA 1 and 2) - 6GB/s throughput. The adapter only transfers data, so SATA drives will only be connected via the 7-pin data connector, and the 15-pin power connector of each hard drive connected in this way will also need to be supplied by a power cord from the computer. The RAID array will be recognized as a "classic" SATA disk, so you can install an operating system or use it for storage. ACTUAL SPEEDS MEASURED IN RAID 0 (with 2 crucial M550 SSDs) : Read 542MB/s, Write 422 MB/s