BAHCO

Hojas S. Maq. Hss Kasto 450 x 38 cm

Name: Hojas S. Maq. Hss Kasto 450 x 38 cm
Brand: BAHCO
SKU: 5bc2748db3c4c29738f09a946801895d
Price: 41.39 EUR
Availability: InStock

1/1

Image of Hojas S. Maq. Hss Kasto 450 x 38 cm

Amazon

Prices from

41.39

Description

Amazon Designed with holes for KASTO machines | If the tension is too low, the blade will bend upwards or twist, causing overload, increased blade wear and an uneven, crooked cut | Fine or powdery swarf indicates that the feed pressure is too low Designed for cutting most materials | Excessive tension causes overloading of the blade and the saw frame | Fine, curly swarf indicates optimum feed pressure High-speed steel machine saw blade | As a general rule, harder materials require a lower travel rate and greater feed pressure | The teeth must not touch the workpiece when the machine is running Suitable for modern machines with trained operators and a high degree of control | If the chips are burnt, the feed pressure is too high | A useful general rule is to have at least three teeth in contact at all times Correct blade tension is essential to ensure a straight cut and a long blade life | If cracks form in the teeth, the feed pressure is too high

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 41.39

Description (1)

Designed with holes for KASTO machines | If the tension is too low, the blade will bend upwards or twist, causing overload, increased blade wear and an uneven, crooked cut | Fine or powdery swarf indicates that the feed pressure is too low Designed for cutting most materials | Excessive tension causes overloading of the blade and the saw frame | Fine, curly swarf indicates optimum feed pressure High-speed steel machine saw blade | As a general rule, harder materials require a lower travel rate and greater feed pressure | The teeth must not touch the workpiece when the machine is running Suitable for modern machines with trained operators and a high degree of control | If the chips are burnt, the feed pressure is too high | A useful general rule is to have at least three teeth in contact at all times Correct blade tension is essential to ensure a straight cut and a long blade life | If cracks form in the teeth, the feed pressure is too high