Heat Conductive Pad 100 x mm Silicone with 1 Thickness Sink

Prices from
21.77

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon [NO CUTTING REQUIRED]: Pre-cut grid size. Simply peel off the square to the desired size. Zero waste, no need to use scissors to cut out irregular shapes. [Cushioning – Noise Reduction]: Normal heat pads only conduct heat without absorbing anything. The thickness of this heat pad can absorb the micro-vibration of the fan. The result? A quieter computer, especially when using high-speed fans. [Low viscosity - no need to press hard]: Unlike viscous pastes that require a lot of force to apply, this thermal pad adheres with a slight pressure. It will not bend the motherboard or damage the solder points under the chips. [Smooth surface – one wipe clean]: thermal paste tends to drip and dirty the surrounding area. This thermal pad can be removed without leaving any residue. If you need to replace the heatsink, simply remove the heat pad and wipe with a dry cloth. [Attention to thickness – Do not apply too thick a layer]: Excessive thickness can deform the motherboard and cause the capacitors or resistors to detach. Before choosing the thickness, measure the available space with a piece of cardboard. A slightly thinner layer rather than too thick is preferable.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

€ 21.77

Description (1)

[NO CUTTING REQUIRED]: Pre-cut grid size. Simply peel off the square to the desired size. Zero waste, no need to use scissors to cut out irregular shapes. [Cushioning – Noise Reduction]: Normal heat pads only conduct heat without absorbing anything. The thickness of this heat pad can absorb the micro-vibration of the fan. The result? A quieter computer, especially when using high-speed fans. [Low viscosity - no need to press hard]: Unlike viscous pastes that require a lot of force to apply, this thermal pad adheres with a slight pressure. It will not bend the motherboard or damage the solder points under the chips. [Smooth surface – one wipe clean]: thermal paste tends to drip and dirty the surrounding area. This thermal pad can be removed without leaving any residue. If you need to replace the heatsink, simply remove the heat pad and wipe with a dry cloth. [Attention to thickness – Do not apply too thick a layer]: Excessive thickness can deform the motherboard and cause the capacitors or resistors to detach. Before choosing the thickness, measure the available space with a piece of cardboard. A slightly thinner layer rather than too thick is preferable.


Product specifications

Brand AXVOLA
EAN
  • 6472179469980

Featured Choice
€ 21.77
To Shop