Glow Plug BOSCH 0 250 603 021

The glow plug heats in approx. 1.3 seconds from ambient temperature to 1000°C. The generation allows an afterglow temperature of almost 1,350 °C. The temperature is about 30 percent higher than metal glow plugs Voltage: 7 V, thread (ISO): M10 x 1.0, tightening torque (Nm): 10-15, dimensions: 96 mm Quick start guaranteed even in extremely cold ambient temperatures of up to -28 °C after only 2 seconds preheating. Conventional metal glow plugs require approx. 15 seconds for equal power. DuraSpeed is one of the fastest glow plugs on the market The low voltage technology reduces battery load and allows faster starting readiness of the engine. A voltage drop in the battery during cold start does not lead to loss of heat output of the glow plug High preheating temperature, long afterglow time: the DuraSpeed ceramic glow plug allows an afterglow time of approx. 15 minutes at 1200°C. This significantly reduces engine noise in cold and idle. intermediate annealing phases of the regeneration of the diesel particulate filter. In addition, they can stabilise short ignition phases in the overrun mode of the engine Diesel particulate filter - The intermediate annealing phases DuraSpeed of the glow plug their regeneration of the diesel particulate filter Ceramic and metal glow plugs are not interchangeable Please check the suitability for your vehicle using the vehicle identification. All restrictions must be complied with All work should only be carried out by trained personnel