Flyback Driver Heater Induction Heating Supply Module, ZVS Low Voltage Plate Module with Coil Power

ZVS Controller Module - This is a tapless terminated mini ZVS board excluding heating coil, transformer, cooling fan, etc. Working power range: the maximum power is 150W (15V induction heating).Push the transformer 12V, the 5+5 primary turns, about 30W Working voltage range: input voltage DC 5V~15V, this voltage range is the voltage at work, not the voltage when the power supply is empty. (The voltage exceeds 15V or less than 5V. We do not guarantee that it can work normally.) Notice: Make sure that all components are soldered correctly, that the positive and negative poles of the power cable are not connected in a reverse way, after connecting the load (heating coil, transformer), and then turn it on. It can not be turned on without load, which makes it break easily Note: When inductive heating, usually work for 5 minutes to turn off the cooling.Because the current is relatively large during induction heating, the heat of the coil is also relatively large.When heated, part of the heat generated by the heated object is transmitted to the heating coil.For a long time, the temperature of the heating coil is high.If the heating coil is connected to the terminal