FixSac 2 Storage Net Fixing Without Drilling for Commercial Vehicles, Camper Vans, Motorhomes, Caravans and Boats 45 x 40 cm

This is a new version of the FixSac storage net founded and marketed by our company in early 2019. The success of the first was the cause of many feedback and suggestions from our customers. This allows us to expand the product through some improvements. Innovative fixing mode without holes, on almost any surface with just one screwdriver. Thanks to the 4 integrated EasyFix nut stickers, which come with M4 x 12mm screws, FixSac can be applied to the following surfaces: sheet metal, glass, plastic, polyester, tiles, melamine, plywood, ... painted or painted wood. FIxSac is available in two sizes: 45 x 40 cm and 35 x 30 cm. These are the maximum recommended dimensions between the attachment point once the nets are hung on the hooks. Each net comes with 4 wood screws. If you do not want to use the adhesive option, you can still screw the product into a wooden stand or similar. Installation instructions: the surface must be clean, free of dust and grease. Use the appropriate detergent. If you want to put the bags on a sheet metal (e.g. commercial vehicle) is recommended to use acetone. Remove the protective films and stick the EasyFix stickers to the desired place relative to the mesh size. Press firmly in the middle of the sticker to attach the middle part. Press air bubbles towards the device. It is best to wait at least 12 hours before screwing on the brackets and hanging the fixsac. Please note that this fixing method is not suitable for walls... the adhesive of the stickers sticks too much and the paint will peel off. !