eSUN PETG+ filament 1.75 mm, Black + Grey, 2 kg PETG with improved impact resistance and heat resistance, 1 per spool, spools, 3D printing

PETG+ filament: eSUN PETG+ with its excellent impact resistance, excellent transparency and good processability, PETG provides a stable and reliable basis for your creative 3D printing projects and thus allows you to easily convert your ideas into finished products. High compatibility: eSUN PETG+ combines high toughness and excellent mechanical properties (such as ABS) with heat resistance, robustness, easy printability and minimal deformation (such as PLA). It is widely used in prototype construction, translucent models and architectural decoration. 【Stable dimensional tolerance】: eSUN PETG+ has minimal tolerance and low deformation to ensure consistent feed and stable prints, good layer connection, less threading, no bubbles, no cracks, no deformation, which allows excellent surface quality and high precision. Tangle free and no plugging: eSUN PETG+ has good roundness and tight diameter tolerance, good winding, does not overlap or tangle. And it melts well, absorbs smoothly and consistently without clogging the nozzle or extruder. Note: The PETG+ material has a slightly higher water absorption capacity. If you start printing again after a long print break, we recommend drying the material at 60°C for at least 8 hours first. Since the PETG+ material sticks to the nozzle relatively easily, we recommend increasing the return suction when printing, disabling the Z-axis raise, reduce the flow percentage and slightly lower the printing speed.