CyberPower Line-Interactive UPS CP1500EIPFCRM1U 1500VA/900W, 1U

Pure sine wave for active PFC power supply: The CP1500EIPFCRM1U delivers a pure sine wave in battery operation, protecting devices that require a clean output voltage, including network equipment, security systems and other electronics with Active PFC compatible power supply. With 1500VA of power and a power factor of 0.6, the UPS covers typical rack loads and provides stable supply during mains failures and voltage fluctuations to maintain operation and data integrity Stabilized voltage through Line-Interactive with AVR: The Line-Interactive Topology with automatic voltage regulation as a single boost stabilises the output supply without switching to battery immediately. The input voltage range from 169 to 271Vac at 230Vac rated voltage and automatic frequency detection for 50/60Hz reduce unnecessary battery use. Internal current limitation and circuit breaker support overload protection, while EMI and RFI filters dampen interference in the network and provide the connected IT more quietly Short-depth rack integration with IEC outputs: The 1U short-depth rack enclosure fits into compact rack enclosures and offers 8 IEC C13 outputs for battery backup and surge protection. Load balancing can be structured over 4 critical and 4 non-critical load outlets to keep prioritized systems running longer. Input via IEC C14, power cable length 1.8 m, Communication, display and optional remote management: The colour LCD shows power, battery status, load status as well as errors and warnings, in addition to the alarm and input and output can be set via the display. For connection to systems, 1 HID-compatible USB port and one DB9 interface are available. The smart slot allows SNMP and HTTP remote monitoring with optional RMCARD205, and PowerPanel Business 4 Management software is recommended for management to support status messages and controlled shutdown Battery, runtime and protection of the data line: the maintenance-free lead-gel battery is user-replaceable and uses the replacement battery set RBP0188, typical charging time 8 hours to 90 percent after complete discharge. Running times are 7.9 minutes at half load and 1.3 min at full load as a bridge for orderly shutdown. Surge protection up to 900 joules complements the protection, and the RJ45 data line protection as 1-On 1-Off supports up to 1Gbps to protect network connections against surges