BGS 74406 Paint Layer Meter for Iron and Non-Ferrous Metals

For non-destructive measurements of the thickness of coatings. Suitable for non-magnetic coatings such as paint, enamel, chrome on ferrous metals and insulating coatings such as paint, anodised on non-ferrous metals LCD display with 128 x 128 dot matrix | easy to follow menu navigation | different measurement modes such as single and continuous measurements | probe modes such as induction and eddy current | group modes such as direct (DIR), readings are lost when switched off and general (GEN), readings are retained when switched off 80 readings memory for each group | Zero point and multi-point calibration (up to 4 points) for each group | Retrieve or delete individually stored readings and delete group readings Statistical display for average, minimum, maximum and deviation, set upper or lower limit alarm, automatic shut-off function, USB interface for data transmission, low battery indicator and error Measuring range: 0 - 2000 µm (0 - 78.7 mils) | Accuracy (induction): ±(2.5%+1µm) | Accuracy (eddy current): ±(2%+0.039mils) | Resolution: 0µm - 99.9µm (0.1µm) / 100µm - 9999. µm (1 µm) / >1000 µm (0.01 mm) | Minimum surface thickness (induction): 0.2 mm | Minimum surface thickness (eddy current): 0.05 mm | Minimum measuring surface: Ø 20 mm | Maximum measurement rate: 2 readings per second | Power supply: 2 x 1.5 V AAA battery | Operating temperature: 0. -40°C Operating humidity: 20% - 90% | Storage temperature: -20 - 70°C | Unit of measurement: µm, mm, mils | Dimensions: 110 x 53 x 24 mm