AS5048A Magnetic Encoder, 5VDC Angle Accuracy 0.05 Rotary Encoder for Brushless Motor, PWM/Serial Peripheral SPI/I2C Interface Port High Module, Default

[Easy To Use] This electromagnetic encoder is suitable for shaft applications, where a simple two-pole magnet makes the sensor IC rotate up or down, and a simple SPI command can be used to program the 0 position into the device. [Absolute Angle Measurement] This AS5048 electromagnetic encoder provides PWM output and SPI or I2C interface to provide absolute angle measurement for the microcontroller. In the mechanical design, there is no need to consider the exact matching of the initial 0 position of the chip and the magnetic pole. [14-bit Sensor] AS5048A electromagnetic encoder is a 14-bit rotary position sensor (previously called encoder), used for 360-degree absolute angle measurement and PWM (= pulse width modulation) based on non-contact magnetic sensor technology for full rotation output ). [High-Precision Measurement] This 14-bit encoder measurement analog front end provides a measurement resolution as low as 0.0219 degrees. The linearization and averaging processing by the microcontroller can realize the angle measurement with 0.05 degree accuracy. [High Working Tolerance] This rotary position sensor has a very high working tolerance, including the deviation of the center position of the chip and the paired magnet, the air gap deviation between the chip and the paired magnet, and the range of -40°C to +150°C The temperature change between time.