Alphacool 17484 Icicle Pro 16 mm HardTube Fitting G1/4 White Sixpack Connection Water Cooling

Prices from
55.12

Sponsored links

COMPARE ALL WEBSHOPS (2)

Description

Amazon The new icicle PRO HardTube fittings from Alphacool are a further development of the well-known, previous icicles. When developing the fittings, Alphacool focused specifically on a specific problem: deforming PETG hard tubes at high temperature. These can deform at 60°C. Although such a temperature is usually rarely reached, it can still be achieved. Deformation is prevented by the new nylon inserts inside and stabilises the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than normal O-rings, which ensures a better grip. Thanks to the insert and the compression seal in the screw connection, the tube is reinforced from the inside and outside. Even under higher loads, the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8 kg. So you don't need to worry about this. Technical data: material: brass, colour: white, height: 23 mm, diameter: 26 mm, thread length: 5 mm, thread G1/4 inch, hardtube, size 16 mm, compatibility: PETG, acrylic, brass and glass tubes, weight 42 g

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

€ 55.12

€ 55.12

Description (1)

The new icicle PRO HardTube fittings from Alphacool are a further development of the well-known, previous icicles. When developing the fittings, Alphacool focused specifically on a specific problem: deforming PETG hard tubes at high temperature. These can deform at 60°C. Although such a temperature is usually rarely reached, it can still be achieved. Deformation is prevented by the new nylon inserts inside and stabilises the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than normal O-rings, which ensures a better grip. Thanks to the insert and the compression seal in the screw connection, the tube is reinforced from the inside and outside. Even under higher loads, the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8 kg. So you don't need to worry about this. Technical data: material: brass, colour: white, height: 23 mm, diameter: 26 mm, thread length: 5 mm, thread G1/4 inch, hardtube, size 16 mm, compatibility: PETG, acrylic, brass and glass tubes, weight 42 g


Product specifications

Brand Alphacool
EAN
  • 4250197174848
MPN
  • 17484

Featured Choice
€ 55.12
To Shop