Adhesive Gel to Reuse the Rain Sensor of Any Windshield/Sunshade Car, Highly Transparent Silicone, Bi Component, Fast Curing, Non Toxic, Original Finish

REUSES THE RAIN SENSOR WHEN CHANGING THE WINDSHIELD When the windshield is changed, the rain sensor loses its mounting bracket and stops working. This bi-component gel allows you to attach it to the new glass safely and functionally, avoiding the cost of a new sensor. Easy to use: suitable for professional workshop use or DIY use. TRANSPARENT BICOMPONENT SILICONE — DOES NOT ALTER VISIBILITY OR SENSOR OPERATION Cures completely transparent and without altering the optical transmission of the sensor. Compatible with all rain sensors from all manufacturers on windshield and rear window of any vehicle. CURING BETWEEN 5 TO 30 MINUTES ACCORDING TO TEMPERATURE — ACCELERABLE WITH HEAT GUN TO 68 °F cures in approximately 5 minutes. To accelerate, use heat gun or place the vehicle in a warm zone. Lower temperature, longer curing time. 2 ml (2+2) CARTRIDGE WITH NOZZLE — SURPRISE GEL CAN BE STORED UP TO 36 MONTHS. If you don't use all gel, remove the nozzle, cover the syringe and store in a dry bag at 59-77°F. Validity: 36 months from the date of production. Contents: 1 x 2 ml cartridge + mixing nozzle | instructions in 8 steps verify that the sensor works → remove → clean with glass cleaner without ammonia → inject gel covering the entire surface → cure → test. Important: do not use products with ammonia, they deteriorate the adhesion of the gel.