3M Scotch Weld DP8005 Structural Plastic Adhesive
Featured
|
€ 59.70 |
To Shop
|
Description
Polyestershoppen
With 3M Scotch-Weld DP8010 Acrylic Adhesive you can effortlessly bond low surface energy plastics, such as polyethylene (PE) and polypropylene (PP), to each other without surface treatment. These materials are often difficult to bond, which makes DP8005 Acrylic Adhesive a very popular adhesive. Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes. In addition, the adhesive has excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions.
Main features 3M Scotch-Weld DP8005
Ideal for bonding polyethylene (PE), polypropene (PP) and other materials.
Little to no surface treatment required.
Excellent resistance to water and humidity.
Short open time (10 minutes).
Cures at room temperature.
Tip: are you looking for a glue that can bond PTFE (Teflon) as well as PE and PP? Use 3M Scotch-Weld DP8010 acrylate adhesive.
Glue for PP (polypropylene)
Polypropylene, often abbreviated as PP, is a fairly hard plastic with high impact resistance and chemical resistance. The material is lightweight and is used for containers and jerry cans, among other things. Not every glue is suitable for bonding this plastic, but with 3M Scotch-Weld DP8005 you can easily bond PP to various surfaces. In addition to bonding PP, you can also use this acrylic glue very well for bonding PE (polyethylene), HDPE, ABS, PMMA, aluminum, bare steel and galvanized steel. A very versatile glue! Because these plastics are processed in so many products, you will certainly need the 3M glue regularly when you are doing DIY.
Tip: by ordering the right application gun and suitable mixing tubes directly, you can start using the adhesive for your job straight away.
Specifications Scotch-Weld DP8005
DP8005
Contents
45 ml
Colour
Off-White
Open time
2.5 - 3 minutes
Time to initial strength
20 minutes
Hardness
Shore D 55
Odour
Low odour
Shear strength
6.9 N/mm²
Peel strength
28 N/mm²
Chemical resistance
**
Viscosity
17.000 mPa.s
Specific gravity
1.00 g/cm³
Application gun
LS50-4 (50 ml)
Suitable mixing tube
Mixing tube B
Adherence Scotch-Weld DP8005
DP8005
Bonds to PE (Polyethylene)
**
Bonds to HDPE
**
Bonds to PP (polypropylene)
**
Bonds to PTFE (Teflon)
Bonds to ABS
***
Bonds to PC
*
Bonds to PMMA
**
Bonds to fibre reinforced products
*
Bonds to aluminum
***
Bonds to galvanized steel
***
Bonds to bare staal
***
Order 3M glue at Polyestershoppen
Polyethylene and polypropylene bonding, or adhering them to other substrates, has never been easier. You can order this 3M DP8005 glue online quickly and easily. Order before 5:00 pm CET (Central European Time) and the acrylic adhesive will be shipped the same day. Do you have any questions? Visit our informaton centre, call us at +31 85 022 0090 or email us at [email protected].
Description
(2)
With 3M Scotch-Weld DP8010 Acrylic Adhesive you can effortlessly bond low surface energy plastics, such as polyethylene (PE) and polypropylene (PP), to each other without surface treatment. These materials are often difficult to bond, which makes DP8005 Acrylic Adhesive a very popular adhesive. Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes. In addition, the adhesive has excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions. Main features 3M Scotch-Weld DP8005 Ideal for bonding polyethylene (PE), polypropene (PP) and other materials. Little to no surface treatment required. Excellent resistance to water and humidity. Short open time (10 minutes). Cures at room temperature. Tip: are you looking for a glue that can bond PTFE (Teflon) as well as PE and PP? Use 3M Scotch-Weld DP8010 acrylate adhesive. Glue for PP (polypropylene) Polypropylene, often abbreviated as PP, is a fairly hard plastic with high impact resistance and chemical resistance. The material is lightweight and is used for containers and jerry cans, among other things. Not every glue is suitable for bonding this plastic, but with 3M Scotch-Weld DP8005 you can easily bond PP to various surfaces. In addition to bonding PP, you can also use this acrylic glue very well for bonding PE (polyethylene), HDPE, ABS, PMMA, aluminum, bare steel and galvanized steel. A very versatile glue! Because these plastics are processed in so many products, you will certainly need the 3M glue regularly when you are doing DIY. Tip: by ordering the right application gun and suitable mixing tubes directly, you can start using the adhesive for your job straight away. Specifications Scotch-Weld DP8005 DP8005 Contents 45 ml Colour Off-White Open time 2.5 - 3 minutes Time to initial strength 20 minutes Hardness Shore D 55 Odour Low odour Shear strength 6.9 N/mm² Peel strength 28 N/mm² Chemical resistance ** Viscosity 17.000 mPa.s Specific gravity 1.00 g/cm³ Application gun LS50-4 (50 ml) Suitable mixing tube Mixing tube B Adherence Scotch-Weld DP8005 DP8005 Bonds to PE (Polyethylene) ** Bonds to HDPE ** Bonds to PP (polypropylene) ** Bonds to PTFE (Teflon) Bonds to ABS *** Bonds to PC * Bonds to PMMA ** Bonds to fibre reinforced products * Bonds to aluminum *** Bonds to galvanized steel *** Bonds to bare staal *** Order 3M glue at Polyestershoppen Polyethylene and polypropylene bonding, or adhering them to other substrates, has never been easier. You can order this 3M DP8005 glue online quickly and easily. Order before 5:00 pm CET (Central European Time) and the acrylic adhesive will be shipped the same day. Do you have any questions? Visit our informaton centre, call us at +31 85 022 0090 or email us at [email protected].
Amazon3M Scotch-Weld DP8005 2 Component Acrylic Based Construction Adhesive, 45 ml, Colour: Translucent
Product specifications
Price History
Prices were last updated on:
Related products
